3 method configuring default route on hub spoke network GNS3

3 method configuring default route on hub spoke network GNS3


dg

  • ip default-network
  • ip route
  • ip default-gateway
this example we�ll use RIP, you can also use EIGRP but not OSPF
prepare the network
R1
interface FastEthernet0/0
ip address 10.1.1.1 255.255.255.0
duplex auto
speed auto
!
interface Serial0/0
ip address 192.168.1.1 255.255.255.0
clock rate 64000
!
interface Serial0/1
ip address 172.16.1.1 255.255.255.0
clock rate 64000
!
router rip
network 172.16.0.0
network 192.168.1.0

R2
interface Serial0/0
ip address 192.168.1.2 255.255.255.0
!
router rip
network 172.16.0.0
network 192.168.1.0

R3
interface Serial0/0
ip address 172.16.1.2 255.255.255.0
!
router rip
network 172.16.0.0

make sure R1, R2 and R3 learn all the advertised interfaces and RIP working fine by pinging from one to other interfaces
R1>sh ip rou
R    99.0.0.0/8 [120/1] via 192.168.1.2, 00:00:16, Serial0/0
     172.16.0.0/24 is subnetted, 1 subnets
C       172.16.1.0 is directly connected, Serial0/1
     10.0.0.0/24 is subnetted, 1 subnets
C       10.1.1.0 is directly connected, FastEthernet0/0
C    192.168.1.0/24 is directly connected, Serial0/0

R2#show ip route
     99.0.0.0/24 is subnetted, 1 subnets
C       99.99.99.0 is directly connected, Loopback99
R    172.16.0.0/16 [120/1] via 192.168.1.1, 00:00:15, Serial0/0
C    192.168.1.0/24 is directly connected, Serial0/0
R3#sh ip rou
R    99.0.0.0/8 [120/1] via 172.16.1.1, 00:00:21, Serial0/0
     172.16.0.0/24 is subnetted, 1 subnets
C       172.16.1.0 is directly connected, Serial0/0
R    192.168.1.0/24 [120/1] via 172.16.1.1, 00:00:21, Serial0/0

now issue this command on R1
R1(config)#ip default-network 10.0.0.0
*again, remember, this only work on hub spoke network only !!!
now, show ip route on R2 and R3
notice there are default route in the routing table
R2#sh ip route
     99.0.0.0/24 is subnetted, 1 subnets
C       99.99.99.0 is directly connected, Loopback99
R    172.16.0.0/16 [120/1] via 192.168.1.1, 00:00:12, Serial0/0
R    10.0.0.0/8 [120/1] via 192.168.1.1, 00:00:12, Serial0/0
C    192.168.1.0/24 is directly connected, Serial0/0
R*   0.0.0.0/0 [120/1] via 192.168.1.1, 00:00:12, Serial0/0
R3#sh ip route
R    99.0.0.0/8 [120/1] via 172.16.1.1, 00:00:17, Serial0/0
     172.16.0.0/24 is subnetted, 1 subnets
C       172.16.1.0 is directly connected, Serial0/0
R    10.0.0.0/8 [120/1] via 172.16.1.1, 00:00:17, Serial0/0
R    192.168.1.0/24 [120/1] via 172.16.1.1, 00:00:17, Serial0/0
R*   0.0.0.0/0 [120/1] via 172.16.1.1, 00:00:17, Serial0/0

now well configure configure static ip route, using this method we need to redistribute the route to R2 and R3 manually
remove default-network and clear the routing table to make sure its not gonna influence our new conf in any possible way
on R1
R1(config)#no ip default-network 10.0.0.0
on R1, R2 and R3
R1#clear ip route *

issue the static route command on R1 and specified the exit interface
R1(config)#ip route 0.0.0.0 0.0.0.0 fastEthernet 0/0
then redistribute this static route to RIP
R1(config)#router rip
R1(config-router)#redistribute static
show ip route on R2 and R3 should show the default route now
R3#sh ip route
Gateway of last resort is 172.16.1.1 to network 0.0.0.0
R    99.0.0.0/8 [120/1] via 172.16.1.1, 00:00:15, Serial0/0
     172.16.0.0/24 is subnetted, 1 subnets
C       172.16.1.0 is directly connected, Serial0/0
R    10.0.0.0/8 [120/1] via 172.16.1.1, 00:00:15, Serial0/0
R    192.168.1.0/24 [120/1] via 172.16.1.1, 00:00:15, Serial0/0
R*   0.0.0.0/0 [120/1] via 172.16.1.1, 00:00:15, Serial0/0
R2#sh ip route
Gateway of last resort is 192.168.1.1 to network 0.0.0.0
     99.0.0.0/24 is subnetted, 1 subnets
C       99.99.99.0 is directly connected, Loopback99
R    172.16.0.0/16 [120/1] via 192.168.1.1, 00:00:01, Serial0/0
R    10.0.0.0/8 [120/1] via 192.168.1.1, 00:00:01, Serial0/0
C    192.168.1.0/24 is directly connected, Serial0/0
R*   0.0.0.0/0 [120/1] via 192.168.1.1, 00:00:01, Serial0/0
this conf also work with EIGRP, but not with OSPF

another way is to use command ip default-gateway, but you need to turn off ip routing to use this
R3(config)#no ip routing
R3(config)#ip default-gateway 172.16.1.1
R3#sh ip route
Default gateway is 172.16.1.1
Host               Gateway           Last Use    Total Uses  Interface
ICMP redirect cache is empty

Comments

Post a Comment

Popular posts from this blog

20346D Module 7 Lab

Image
20346D Module 7 Lab Lab 7: Administering Exchange Online Scenario With Exchange Online now implemented as part of the Deploy Phase, Lucerne Publishing is administering its user accounts both in the cloud and on-premises. Heidi has moved on to manage protection policies, which are very important for the company. She is implementing personal archives, together with anti-spam and anti-malware settings. To assist in communicating with different associates and contacts, she is also setting up mail contacts and mail users in Exchange Online.  Objectives By the end of this lab, you should be able to: � Configure personal archive polices, customize retention tags, and apply retention policies. � Set anti-malware and anti-spam policies in line with company requirements. � Add external user email addresses as both mail contacts and mail users. � Create and schedule events with resource mailboxes. Lab Setup Estimated Time: 120 minutes  Virtual machine: 20346C-LUC-CL1 Username: Studen...
Keep reading

20346D Module 6 Lab

Image
20346D Module 6 Lab Lab 6: Configuring DNS Records and Migrating to Exchange Online Scenario Lucerne Publishing is now well into the Deploy phase and is in the process of adopting Office 365. The company needs to ensure that the cutover migration to Exchange Online is successful and that the DNS records for Office 365 are correctly configured. In addition, it needs to verify that all parent and subdomains have been added, and that the service records for different Office 365 services have been configured.  Objectives The objectives of this lab are to: � Add and configure domains and subdomains in Office 365.  � Carry out the cutover migration to Exchange Online. � Configure DNS records for Exchange, SharePoint and Lync in Office 365. Lab Setup Estimated Time: 120 minutes Virtual machine: 20346C-LUC-CL1 Username: Student1 Password: Pa$$w0rd Where you see references in the steps to lucernepublishingXXXX.onmicrosoft.com , you should replace XXXX with the unique Lucerne Publish...
Keep reading

2015 2016 LASU POST UTME REGISTRATION FORM ON SALE

Image
2015 2016 LASU POST UTME REGISTRATION FORM ON SALE  Check out Lagos State University ( LASU ) Post-UTME/DE 2015: Date, Eligibility,Cut-off And Registration Detail. This to inform the general public that Lagos State University LASU2015/2016 Post UTME Screening Tests, for candidates seeking admission via UTME (100 level) have started. These screening tests are mandatory requirements for entry into Lagos State University. There shall be two rounds of Post-UTME Screening Tests. REQUIREMENT It is only the candidate who took  part in already concluded March 2015 Unified Tertiary Candidates (JAMB) who chose  Lagos State University ( LASU ) and have scored a minimum of 180 marks are Qualify to participate in the Post-UTME Screening Tests. In addition, candidates must be at least 16 years of age Candidates who have chosen Lagos State University as their Choice of institution, in the March 2015 Unified Tertiary. Original JAMB Result Slip Click here to get your original JAMB Resul...
Keep reading